1 shared features of the rcm2000/3000 rabbitcore series continued next page 8 selection guide rcm2000/3000 rabbitcore? ? 2004 rabbit semiconductor. all rights reserved. ? 2004 zworld, inc. all rights reserved. 02/05 feature rcm2xxx rcm3xxx emi reduction spectrum spreader for reduced emi (radiated emissions) serial rate max. asynchronous burst rate = clk/32 max. asynchronous burst rate = clk/8 backup battery connection for user-supplied battery (to support rtc and sram) slave interface permits use as master or intelligent peripheral with rabbit-based or other master controller real-time clock yes, battery backable timers five 8-bit timers (four cascadable from the first) and one 10-bit timer with 2 match registers ten 8-bit timers (six cascadable from the first) and one 10-bit timer with 2 match registers watchdog yes humidity 5?95% (non-condensing) pulse-width modulation n/a 8-bit free running counter and four 10-bit pulse-width registers input capture n/a 2-channel input capture can be used to time input signals from various port pins. quadrature decoder n/a 2-channel quadrature decoder accepts inputs from external incremental encoder modules.
2 distinguishing features of the rcm2000 rabbitcore series * grouped in 8-bit ports and shared with serial ports **1 clocked line available only on programming header feature rcm2000 rcm2010 rcm2020 rcm2100 rcm2110 rcm2120 rcm2130 rcm2200 rcm2210 rcm2250 rcm2260 rcm2300 cpu speed 25.8 mhz 18.4 mhz 22.1 mhz ethernet none 10base-t rj-45, 2 leds none 10base-t rj-45, 2 leds 10base-t raw signals 10base-t rj-45, 2 leds 10base-t raw signals none flash memory 256k 512k 256k 512k 256k 512k 256k sram 512k 128k 512k 128k 512k 128k 512k 128k extended memory none analog inputs none general purpose i/o* 40 parallel i/o 26 configurable i/o 8 fixed inputs 6 fixed outputs 34 parallel i/o 20 configurable i/o 8 fixed inputs 6 fixed outputs 40 parallel i/o 26 configurable i/o 8 fixed inputs 6 fixed outputs 26 parallel i/o 16 configurable i/o 7 fixed inputs 3 fixed outputs 29 parallel i/o 17 config. i/o 8 fixed inputs 4 fixed outputs add?l inputs 2 startup mode, reset add?l outputs watchdog, reset status, reset external i/o 13 address, 8 data, i/o read-write, buffer enable 13 buffered address lines, 8 buffered data lines, i/o read-write, buffer enable 4 address, 8 data, i/o read-write serial ports four 5 v cmos-compatible 4 configurable as asynchronous 2 configurable as clocked serial (spi) four 5 v cmos-compatible 4 configurable as asynchronous 2 configurable as clocked serial (spi) ** power 4.75?5.25 v dc 130 ma 4.75?5.25 v dc 98 ma 4.75?5.25 v dc 140 ma 4.75?5.25 v dc 134 ma 4.75?5.25 v dc 108 ma operating temp. ?40c to +85c ?40c to +70c ?40c to +80c ?40c to +70c ?40c to +85c board size 2.3? x 1.9? x 0.5? (58 x 48 x 13 mm) 3.5? x 2.0? x 0.86? (89 x 51 x 22 mm) 3.5? x 2.0? x 0.5? (89 x 51 x 13 mm) 2.3? x 1.6? x 0.86? (59 x 41 x 22 mm) 1.60? x 1.15? x 0.47? (41 x 29 x 12 mm) connectors 2 x 20, 2 mm idc headers 2 x 13, 2 mm idc headers part number 101-0404 101-0405 101-0383 101-0434 101-0435 101-0436 101-0446 101-0454 101-0488 101-0494 101-0955 101-0453 development kit part number u.s.101-0398 int?l 101-0399 u.s. 101-0451 int?l 101-0452 u.s. 101-0475 int?l 101-0478 u.s. 101-0480 int?l 101-0481
3 distinguishing features of the rcm3000 rabbitcore series feature rcm3000 rcm3010 rcm3100 rcm3110 rcm3200 rcm3210 rcm3220 rcm3300 rcm3310 rcm3360 rcm3370 cpu speed 29.4 mhz 44.2 mhz 29.4 44.2 mhz ethernet 10base-t, rj-45, 2 leds none 10/100base-t, rj-45, 3 leds none 10/100base-t, rj-45, 3 leds flash memory 512k (2 x 256k) 256k 512k (2 x 256k) 256k 512k 256k 512k sram 512k 128k 512k 128k 512k program + 256k data 128k 512k program + 256k data 512k program + 512k data extended memory none 8 mb serial flash 4mb serial flash 16 mb nand flash (chip) none removable flash memory analog inputs none general purpose i/o* 52 digital i/o 44 configurable i/o 4 fixed inputs 4 fixed outputs 54 digital i/o 46 configurable i/o 4 fixed inputs 4 fixed outputs 52 digital i/o 44 configurable i/o 4 fixed inputs 4 fixed outputs 49 parallel digital i/o 43 con? gurable i/o 3 ? xed inputs 3 ? xed outputs 52 parallel digital i/o 44 con? gurable i/o 4 ? xed inputs 4 ? xed outputs add?t inputs 2 startup mode, reset add?t outputs status, reset external i/o 6 address (shared with i/o) , 8 data, plus i/o rd, i/o wr 5 address (shared with i/o) , 8 data, plus i/o rd, i/o wr serial ports six 3.3 v cmos-compatible: 6 configurable as asynchronous (with irda) 4 configurable as clocked serial (spi) 2 configurable as sdlc/hdlc five 3.3 v cmos-compatible: 5 con? gurable as asynchronous (with irda) , 3 con? gurable as clocked serial (spi) 2 con? gurable as sdlc/hdlc 1 asynchronous serial port (programming) six 3.3 v cmos-compatible: 6 con? gurable as asynchronous (with irda) 4 con? gurable as clocked serial (spi) 2 con? gurable as sdlc/hdlc 1 asynchronous serial port dedicated (programming) power 3.15?3.45 v dc 150 ma 3.15?3.45 v dc 75 ma 3.15?3.45 v dc 255 ma 3.15?3.45 v dc 350 ma @ 3.3 v operating temp. ?40c to +70c ?40c to +85c ?40c to +70c board size 2.73? 1.85? 0.86? (69 x 47 x 22 mm) 1.85? 1.65? 0.55? (47 x 42 x 14 mm) 2.73? 1.85? 0.86? (69 x 47 x 22 mm) connectors two 2 x 17, 2 mm idc headers part number 101-0507 101-0508 101-0517 101-0518 101-0520 101-0521 101-0522 101-0691 101-0698 101-0949 101-0950 development kit part number u.s. 101-0523 int?l 101-0524 u.s. 101-0533 int?l 101-0534 u.s. 101-0552 int?l 101-0553 u.s. 101-0704 int?l 101-0705 u.s.101-0953 int?l 101-0954 * grouped in 8-bit ports and shared with serial ports continued next page 8
4 feature rcm3400 rcm3410 rcm3600 rcm3610 rcm3700 rcm3710 rcm3720 cpu speed 29.4 mhz 22.1 mhz ethernet reference design for 10/100base-t mac id installed none 10base-t, rj-45 flash memory 512k 256k 512k 256k 512k 256k 512k sram 512k 256k 512k 128k 512k 128k 256k extended memory none 1mb serial flash analog inputs 8 channels single-ended (11-bit) or 4 channels differ. (12-bit) , prog. gain 1, 2, 4, 5, 8, 10, 16, and 20 v/v. none general purpose i/o* 47 digital i/o 41 configurable i/o 3 fixed inputs 3 fixed outputs 33 parallel digital i/o lines 31 configurable i/o 2 fixed outputs add?t inputs 2 startup mode, reset in, convert reset none add?t outputs status, reset out, bvref none external i/o 6 address (shared with i/o ), 8 data, plus i/o rd, i/o wr 5 address (shared with i/o) , 8 data, plus i/o rd, i/o wr serial ports five 3.3 v cmos-compatible: 4 configurable as asynchronous (with irda) , 3 as clocked serial (spi) , 2 as sdlc/hdlc (with irda) 1 asynchronous serial port (programming) support for mir/sir irda transceiver four 3.3 v cmos-compatible: 4 configurable as asynchronous (with irda) 3 as clocked serial (spi) and 1 as sdlc/hdlc (with irda), or 1 spi and 2 sdlc/hdlc 1 asynchronous serial port (programming) power 3.0?3.45 v dc 97 ma @ 29.4 mhz/2.8?3.45 v dc 57 ma @ 14.7 mhz 4.75-12.6 vdc 60 ma @ 22.1 mhz; 38 ma @ 11.06 mhz 4.75-5.25 vdc 100 ma @ 22.1 mhz 78 ma @ 11.06 mhz operating temp. ?40c to +85c ?40c to +70c board size 1.38? 1.16 ? 0.31? (35 x 29 x 7.4 mm) 2.10? 1.20 ? 0.62? (53 x 30 x 16 mm) 2.95? 1.20 ? 0.88? (75 x 30 x 22 mm) connectors two 2 x 17, 1.27 mm idc headers single 2 x 20, 0.1? idc header part number 101-0561 101-0562 101-0672 101-0673 101-0674 101-0675 101-0961 development kit part number u.s. 101-0587 int?l 101-0588 u.s. 101-0678 int?l 101-0679 u.s. 101-0680 int?l 101-0681 u.s. 101-0963 int?l 101-0964 * grouped in 8-bit ports and shared with serial ports
|
